The Crystal Direct Composite Doors Estimating Calculator estimates the Materials, Labour and Plant required to fit a composite door, complete with door furniture such as letter box.
This Estimating Calculator is linked to the Specification. Therefore many of the items required for the door are specified from the Specification you have chosen. These items deal with the structural opening and the finishes.
To complete an estimate in the Crystal Direct Composite Doors Estimating Calculator, you use the picker to select the door, lintel and cavity closer required and then enter dimensional information into the Worksheet.
The combination of Resources taken from the Specification and the dimensional information will then calculate the following items automatically:
- Frame fixings
- Plus all labour associated with the above
To estimate multiple doors of the same size and specification, enter the number of doors when prompted. For example, if you were estimating two Crystal Direct Composite Doors, you would enter 2. This multiplies all Materials, Labour and other associated Resources by two and subsequently doubles the cost.
- You should check all the pre-specified items, and in particular any items that are highlighted in red to show that they are “critical items” which are listed in the Calculated Resources tab of the Estimating Calculator.
- If the size of the opening is changed you must check the suitability of the door, frame and lintel. Carefully scrutinise the Sundry Resources tab. This section covers the more freeform aspects of the door such as the door type, furniture, lintels, sills and labour for fixing the door which are not necessarily directly linked to the dimensions you have entered.